Product name：papr respirator for healthcare
Model: P1004 Powered Air Purifying Respirator, P1003 Powered Air Purifying Respirator, P1000 Powered Air Purifying Respirator, P-SH100 Powered Air Purifying Respirator, P1005 Powered Air Purifying Respirator, P1006 Powered Air Purifying Respirator
Name：Powered Air Purifying Respirator
Item No.: STAWAR Powered Air Purifying Respirator
Article number: SPARX Powered Air Purifying Respirator
Pre-use inspection steps.
1, check papr respirator for healthcare each group of parts is complete, no defect, joints, pipeline, valve body connection is intact.
2, check papr respirator for healthcare air supply system air tightness and air source pressure values.
3、Close the bypass valve of the gas supply valve and the gas supply valve, then open the bottle valve switch, put the full face mask on the head correctly and take a deep breath, the valve of the gas supply valve should be able to open automatically and supply gas.
4、Check whether the gas cylinder is fixed firmly.
1, will be disconnected from the fast connector air respirator, the bottle valve down on the back of the body; without the fast connector papr respirator for healthcare
, the full facepiece and air supply valve separation, the bottle valve down on the back of the body; according to the height of the adjustment belt length, according to the waist circumference adjustment of the length of the belt, buckle the belt. Adjust the pressure gauge to a position that is easy for the wearer to observe.
2, the quick connector will be inserted, the air supply valve and full face mask should also be connected; no quick connector papr respirator for healthcare to hang the neck strap of the full face mask on the neck.
3, the bottle valve switch open more than a turn, at this time there should be a loud alarm sound, that the bottle valve open has been filled with compressed air; pressure gauge pointer should also knowledge of the corresponding pressure.
4, wear a good full face mask, take a deep breath, air supply valve supply air and then observe the pressure gauge, if there is a swing back, it means that the bottle valve switch is not enough open air, should open some more, know that the pressure gauge does not fall back so far.